廣東鍋爐風機生產廠家—好風機 選雅高
業務聯系：18512099438
|
業務聯系：18512099438東莞市雅高通風設備制造有限公司
|
發布時間: 2020-03-20
|
576 次瀏覽
|
分享到:
鍋爐風機 相關產品請點擊了解：4-72離心風機 9-19離心風機
業務聯系：18512099438
鍋爐風機系要喺安全且穩定嘅環境運行，先至可以發揮作用同效率。我哋喺啟動鍋爐風機之前，要先檢查一下電機嘅情況，睇下系咪有損壞嘅現象或者系安裝走趲嘅現象，呢啲看似好細嘅細節恰恰系影響風機正常啟動嘅關鍵，所以喺使用前嘅檢查過程中，唔可以有絲毫嘅松懈。
鍋爐風機安全啟動的方法：
How to start safely:
1、鍋爐風機主要由葉輪、機殼、進風口、調節門及傳動部分組成，各部有各自的功能，每個部分都完好無損才能保證正常運行。
1. The boiler fan is mainly composed of impeller, casing, air inlet, regulating valve and transmission part. Each part has its own function. Only when each part is intact can normal operation be ensured.
2、鍋爐風機葉輪由后傾翼型葉片焊接于弧形的輪蓋與平板形的輪盤中間，保證了風機的低噪聲、高強度。葉輪經靜、動平衡校正運轉平穩。同一機號的引風機葉輪結構相同。
2. The impeller of the boiler fan is welded between the arc-shaped wheel cover and the flat wheel plate by the backward inclined wing blade, which ensures the low noise and high strength of the fan. The impeller runs smoothly after static and dynamic balance correction. The impeller structure of induced draft fan of the same unit number is the same.
3、風機機殼是用普通鋼板焊接而成的蝸形體。風機的機殼制成整體結構。對于引風機，在蝸形板上開有清灰門，同時適當加厚，以防煙灰磨損，延長其使用壽命。
3. The fan casing is a worm shaped body welded with ordinary steel plates. The shell of the fan is made into an integral structure. For the induced draft fan, a dust cleaning door is opened on the volute plate, and the door is thickened appropriately to prevent the ash from wearing and prolong its service life.
4、進風口為收斂流線形的整體結構，用螺栓固定在機殼入口側。
4. The air inlet is an integral structure of convergence streamline shape, which is fixed on the inlet side of the casing with bolts.
5、調節門用來調節風機流量大小的裝置。
5. A device used to adjust the flow of a fan.
6、所以，風機在使用前各個部件都要仔細的檢查，并且定期的維護，這樣才能延長使用。
6. Therefore, before using the fan, each component should be carefully checked and regularly maintained, so as to extend the use.
業務聯系：18512099438
鍋爐風機系要喺安全且穩定嘅環境運行，先至可以發揮作用同效率。我哋喺啟動鍋爐風機之前，要先檢查一下電機嘅情況，睇下系咪有損壞嘅現象或者系安裝走趲嘅現象，呢啲看似好細嘅細節恰恰系影響風機正常啟動嘅關鍵，所以喺使用前嘅檢查過程中，唔可以有絲毫嘅松懈。
鍋爐風機安全啟動的方法：
How to start safely:
1、鍋爐風機主要由葉輪、機殼、進風口、調節門及傳動部分組成，各部有各自的功能，每個部分都完好無損才能保證正常運行。
1. The boiler fan is mainly composed of impeller, casing, air inlet, regulating valve and transmission part. Each part has its own function. Only when each part is intact can normal operation be ensured.
2、鍋爐風機葉輪由后傾翼型葉片焊接于弧形的輪蓋與平板形的輪盤中間，保證了風機的低噪聲、高強度。葉輪經靜、動平衡校正運轉平穩。同一機號的引風機葉輪結構相同。
2. The impeller of the boiler fan is welded between the arc-shaped wheel cover and the flat wheel plate by the backward inclined wing blade, which ensures the low noise and high strength of the fan. The impeller runs smoothly after static and dynamic balance correction. The impeller structure of induced draft fan of the same unit number is the same.
3、風機機殼是用普通鋼板焊接而成的蝸形體。風機的機殼制成整體結構。對于引風機，在蝸形板上開有清灰門，同時適當加厚，以防煙灰磨損，延長其使用壽命。
3. The fan casing is a worm shaped body welded with ordinary steel plates. The shell of the fan is made into an integral structure. For the induced draft fan, a dust cleaning door is opened on the volute plate, and the door is thickened appropriately to prevent the ash from wearing and prolong its service life.
4、進風口為收斂流線形的整體結構，用螺栓固定在機殼入口側。
4. The air inlet is an integral structure of convergence streamline shape, which is fixed on the inlet side of the casing with bolts.
5、調節門用來調節風機流量大小的裝置。
5. A device used to adjust the flow of a fan.
6、所以，風機在使用前各個部件都要仔細的檢查，并且定期的維護，這樣才能延長使用。
6. Therefore, before using the fan, each component should be carefully checked and regularly maintained, so as to extend the use.
Contact us
聯系我們
關注
